The Compliance of 3D Scanned Anthropometric Data with a CAD Grafis Measurement Chart

Ausma Vilumsone, Inga Dabolina

Abstract


The designing of clothes includes a row of processes and one of the most time and labor consuming is constructing. The construction displays the layout (pattern) of the surface of the body (garment). In order to exclude routine job from the pattern making process CAD Systems are used. To gain a good construction, exact, proper and accurate human body measurements are needed. Measurements acquired by 3D scanning device should be checked out for compliance with CAD systems for automatized pattern making procedure.

Keywords:

3D anthropometry; anthropometric data; CAD systems; pattern making

Full Text:

PDF

References


Fan, J., Yu, W., Hunter, L. Clothing appearance and fit: Science and technology. Cambridge, England: Woodhead Publishing Limited, 2004, p. 240. ISBN 0-8493-2594-3. http://doi.org/cctv33

Hwang Su-Jeong. Three dimensional body scanning systems with potential for use in the apparel industry. Raleigh, 2001, p. 63.

Homepage of Human Solutions GmbH [online]. [viewed 30.06.2014]. Available from: www.human-solutions.com

Dāboliņa, I. Anthropometrical Measurements for Three-Dimensional Clothing Design. Synopsis of Doctoral Thesis-R.: RTU, 2010.-35 p.

CAD Grafis [online]. [viewed 30.06.2014]. Available from: www.grafis.de

Description of Pattern system M. Müller & Sohn [online]. [viewed 03.09.2014]. Available from: http://muellersohn.com




DOI: 10.7250/mstct.2014.011

DOI (PDF): https://doi.org/10.7250/g642

Refbacks

  • There are currently no refbacks.