The Compliance of 3D Scanned Anthropometric Data with a CAD Grafis Measurement Chart
Abstract
The designing of clothes includes a row of processes and one of the most time and labor consuming is constructing. The construction displays the layout (pattern) of the surface of the body (garment). In order to exclude routine job from the pattern making process CAD Systems are used. To gain a good construction, exact, proper and accurate human body measurements are needed. Measurements acquired by 3D scanning device should be checked out for compliance with CAD systems for automatized pattern making procedure.
Keywords: |
3D anthropometry; anthropometric data; CAD systems; pattern making
|
Full Text: |
References
Fan, J., Yu, W., Hunter, L. Clothing appearance and fit: Science and technology. Cambridge, England: Woodhead Publishing Limited, 2004, p. 240. ISBN 0-8493-2594-3. http://doi.org/cctv33
Hwang Su-Jeong. Three dimensional body scanning systems with potential for use in the apparel industry. Raleigh, 2001, p. 63.
Homepage of Human Solutions GmbH [online]. [viewed 30.06.2014]. Available from: www.human-solutions.com
Dāboliņa, I. Anthropometrical Measurements for Three-Dimensional Clothing Design. Synopsis of Doctoral Thesis-R.: RTU, 2010.-35 p.
CAD Grafis [online]. [viewed 30.06.2014]. Available from: www.grafis.de
Description of Pattern system M. Müller & Sohn [online]. [viewed 03.09.2014]. Available from: http://muellersohn.com
DOI: 10.7250/mstct.2014.011
Refbacks
- There are currently no refbacks.